I finally got round to printing the sight and slider. These were printed with a black PLA plastic at a 0.3mm layer height. It was printed i...

A week and a half ago I received delivery of my new toy, a Mendel90 3D printer kit. It took about 20 hours to assemble and about another 8 ...

Got a lot of work done this weekend, the front end in particular is coming together well. I started by cutting out the display panel out of...

Easter weekend, 4 days, should've had lots of time to work on the gun. Unfortunately it didn't turn out that way. Only got about 4 ...

This weekend I reattached the body to the stock and grip. I did this by cutting rectangle pieces of MDF and slots into the two parts. I the...

This weekend I made a decent amount of progress on the side panels of the main body. Building up the panels with body filler alone was taki...

Didn't get anything done last weekend unfortunately, too busy with errands. But today I found the time to work more on the circuitry. I...

I had a pair of stepper motors arrive on Friday so I spent the evening hooking them up to an Arduino Nano. Turns out they don't spin fa...

Today I focused on the feature at the top of the grip. I decided to cut it off so I could shape it easily, but not before I drilled some ho...

As I started from scratch during the week I spent this weekend going back over the same steps as before. The grip is now bulked out. I stil...